When hydraulic lines have to be replaced or extended by hand, professional tools should be ready-to-hand.
STAUFF offers a convenient and robust steel case with all tools required for bending and sawing off steel and stainless steel hydraulic tubes with an outer diameter of 6, 8, 10 or 12 mm. The case contains a combined bending and sawing device, three steel bending rollers and a bending lever.
It also offers space for a manual deburring tool, which can be purchased separately.
The cuts are made with a standard hacksaw. Particularly convenient: The combined pipe and tube bending and sawing device can simply be fastened with a vice or attached directly to a workbench worktop with up to 35 mm thickness.